15KG Load Large Metal Smart Shock-Absorbing RC Robot Tank Chassis + Wireless WiFi/ Bluetooth/ Handle Control Kit DIY For Arduino

Features：

• The tank is made of high quality metal, has a large load, is very strong and durable;
• Tank chassis with independent shock absorption system, can run smoothly even on uneven ground;
• The tank chassis is designed with rolling bearings to reduce drag and make the tank run smoothly and quickly;
• The tank chassis is equipped with a wireless WiFi / Bluetooth / handle control kit, which can control the actions of the tank chassis through the mobile phone app and wireless handle;
• The hole position of the panel of the tank chassis is compatible with Arduino and Raspberry Pi, and the development space is large.

Product Parameters :

• Material: stainless steel metal
• Size: 32*25*10 cm
• Weight: 3.7 kg
• Load:10-15 kg
• Track: Metal
• Wheel: Metal
• Rolling bearing
• Heavy load
• Motor: High torque 37mm motor

Metal track:

• Material: metal track
• Width: 4cm
• Weight: 0.56kg / piece
• Can be removed freely

Motor parameters:

• Name: Miniature DC Geared Motor
• Model: XD-37GB520
• Speed: 5-800rpm
• Voltage: DC 12V / 24V
• Current: 0.5A
• Power: 10W
• Weight: 280g
• Motor size: 37 * 58mm
• Out shaft size: 6 * 15mm
• Speed regulation: yes
• Forward and reverse: Yes

Control kit:

Module pin description and schematic diagram:

• A high-power DC motor with ATMEGA328 embedded as a motor drive control unit.
• ATMEGA328 MCU programming interface (USB and ICSP) is reserved on the board to facilitate program programming;
• Part of the analog / digital signal ports for users to expand;
• Reserve Bluetooth & WIFI interface, our module can be plugged in directly;
• Reserve PS2 controller interface for direct plug-in use;
• Reserve the I2C interface and the + 5V led out at the same time for small power modules (maximum output current does not exceed 100mA);
• Two DC motor outputs, single channel maximum output current 20A;
• Power input, maximum DC voltage 30V. The power input terminal is not designed with anti-reverse connection protection, and incorrect wiring may cause the bomber;
• The motor output overcurrent protection software is reserved for detection, and the protection threshold can be set by software (connected to the external interruption port D2 of ATMEGA328, please refer to the schematic design parameters for specific calculation. The protection current can be modified by software ≤20A);