Regular price
$1,395.99
$3,255.99
Sale
Happymodel Mobula6 Mobula 6 1S 65mm Brushless Bwhoop FPV Racing Drone with AIO 4in1 Crazybee F4 Lite Runcam Nano3 Preorder Dron
Note: Mobula 6 Order dealing time is about 15-20 days ,Pls don't place the order if your mind it. Thanks!
Features:
AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX
Extreme light 1S 65mm Brushless whoop only 20g
Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
Smooth and powerful
Compatible for 1S Lipo/LIHV
Camera Angle adjustable
Specifications:
Brand Name: Happymodel
Item Name: Mobula6 1S 65mm Brushless whoop drone BNF version
Wheelbase: 65mm
Size: 80mm*80mm*37mm
Weight: 20g
Receiver option:
Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)
Motor speed option:
SE0802 KV25000(Race Edition)
SE0802 KV19000(Regular Edition)
Package includes:
Item Name
|
Qty
|
Mobula6 1S 65mm whoop Drone Frame
|
1
|
SPI Receiver Option1: Crazybee F4 Lite FC built-in Frsky SPI D8 RX
|
1
|
SPI Receiver Option2: Crazybee F4 Lite FC built-in Flysky SPI RX
|
SE0802 KV19000 or KV25000 brushless motor
|
4
|
Gemfan 1219-3 Propellers(4cw+4ccw)
|
1
|
Runcam Nano3 1/3 CMOS 800TVL camera
|
1
|
5.8G 25mw 40ch vtx (Flight controller built-in)
|
1
|
1S 300mah 30C LiHV Battery
|
4
|
1S Lipo/LIHV USB Charger
|
1
|
Propeller disassemble tool
|
1
|
Spare parts specifications:
Motor
|
Mode: SE0802 19000KV or KV25000 Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm Weight(g):1.9g No.of Cells(Lipo):1S only
|
Propellers
|
Gemfan 1219-3
Center Thickness:5mm
Prop Disk Diameter:31mm
Center Hole Inner diameter:1.0mm
Weight:0.28g
|
Flight controller
|
(Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR
(Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver Built-in 5V 1A BEC Built-in voltage detection
|
Onboard 4in1 ESC
|
MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV
Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_7.HEX Default protocol: DSHOT600
|
Onboard Frsky SPI D8 receiver Version
|
SPI BUS receiver Frsky D8 compatible Compatible Non EU transmitter D8 model
Channels: 8ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m
|
Onboard Flysky SPI receiver Version
|
SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m Failsafe support
|
Onboard 5.8g VTX
|
Output power: 25mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race band
Smartaudio ready
|
Runcam Nano3
|
Model: RunCam Nano 3
Image Sensor: 1/3" CMOS
Horizontal Resolution: 800TVL
Lens : 2.1mm(M8) FOV 160°
Signal System: PAL/NTSC Non Switchable
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V 120mA@3.3V
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm
|
Lipo Battery
|
Capacity:300mAh Voltage:3.8v Continuous Discharge Rate: 30C Size: 57mmx12mmx7mm Weight: 8g
Connector: PH2.0
|






